Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Electrolux EU 6134 U
Summary of Contents for Electrolux EU 6134 U
- Page 1 I N F O INSTALLATION AND INSTRUCTION MANUAL FREEZER EU 6134 U 2222740-53...
-
Page 2: Table Of Contents
Maintenance and Cleaning Internal cleaning Periodic cleaning When the appliance is not in use Something Not Working? Service and Spare Parts Customer Care Departments Electrolux Service Force Guarantee Conditions Instructions for the Installer Technical Specifications Installation Positioning Electrical Connection Building-in Instructions... -
Page 3: Important Safety Instructions
Do not place carbonated or fizzy drinks in the freezer compartment. Ice lollies can cause ‘frost/freezer burns’ if con- sumed straight from the star compartement. Do not remove items from the freezer comparte- ment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns. -
Page 4: Description Of The Appliance
Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped inside. DESCRIPTION OF THE APPLIANCE Freezer calendar Freezer control Compartment for frozen food storage Compartment for freezing fresh food... -
Page 5: Operation
After the time has elapsed place the food to be frozen in the two top compartments of the freezer as this is the coldest part; if freezing only a small amount of food, always use the top compart- ment. -
Page 6: Frozen Food Storage
During the freezing process, ensure that the freezer door remains closed. Frozen food storage When you first start the freezer or if the freezer has been out of use for some time, we advise you to run your appliance for at least two hours in the «fast freeze»... -
Page 7: Health And Safety Guidelines
Cool cooked food as quickly as possible but do NOT place in the freezer until cool. (Leave food in a place as cool as possible in order that it can then be placed in the refrigerator as soon as pos- sible). -
Page 8: Defrosting
Important In the event of a power failure causing the temperature within your freezer to rise, do not re-freeze the food without checking its condition. The following guidelines should assist you: Ice-cream: once thawed should be discard-ed. -
Page 9: Maintenance And Cleaning
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELEC- TRICITY supply. Warning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians. -
Page 10: Something Not Working
Symptom No power to the appliance The temperature in the freezer is too high The freezer door will not open The compressor runs continuously Excessive frost and ice has built up. -
Page 11: Service And Spare Parts
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Electrolux Service Force Centre by telephoning: 0870 5 929929 Your telephone call will be automatically routed to the Service Centre covering your post code area. -
Page 12: Electrolux Service Force
To contact your local Service Force Centre telephone 08705 929 929 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD JERSEY Jersey Electricity Company Haut De L’orme Rue De Haut De L’orme Trinity Jersey Channel Islands JE3 5FG SCOTLAND ABERDEEN 54 Claremont Street... - Page 13 To contact your local Service Force Centre telephone 08705 929 929 MIDLANDS BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB BOURNE Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St. Mary’s Street Bridgnorth Shropshire WV16 4DR GLOUCESTER 101 Rycroft Street Gloucester GL1 4NB...
-
Page 14: Guarantee Conditions
Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. -
Page 15: Technical Specifications
TECHNICAL SPECIFICATIONS DIMENSIONS POWER SUPPLY VOLTAGE AND FREQUENCY TOTAL POWER ABSORBED AVERAGE DAILY UNITS ELECTRICITY(*) GROSS CAPACITY NET CAPACITY STAR RATING (*)This figure is based on standard test results in accordance with European Standard EN153. Actual con- sumption will depend on how the appliance is used and where it is located. INSTALLATION Positioning This appliance should only be installed at a location... -
Page 16: Electrical Connection
ELECTRICAL CONNECTION WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suit- able for your socket outlet, it must be cut off and the appropriate plug fitted. -
Page 17: Building-In Instructions
BUILDING-IN INSTRUCTIONS Before carrying out any work, remove the plug from the power socket. Grid preparation Left door opening: Remove the left side (A) of the grid cutting it from the rear (see figure). Right door opening: Remove the right side (B) of the grid cutting it from the rear (see figure). -
Page 18: Building The Appliance In Under A Worktop
Attention After completion of the door reversing opera- tion, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fit- ting of the gasket or accelerate this process by heating up the part involved with a normal hairdryer on a low setting. - Page 19 3. Two cabinet securing brackets are supplied with the installation pack. They need to be assembled onto the cabinet prior to cabinet being pushed into the Kitchen aperture. - To fit these brackets remove the two screws at the top left and right hand front corners of the cabinet. - Position the two brackets as shown in the figure and replace the two securing screws.
- Page 20 7. Screw appliance into place and retain the cabinet with screws through the securing brackets into the worktop or adjacent woodwork as necessary. 8. To mount the furniture door proceed as shown in the figures: clic clic...
- Page 21 UPPER PART OF KITCHEN FURNITURE PANEL LOWER PART OF KITCHEN FURNITURE PANEL...
-
Page 22: Fitting The Plinth
9. Refit the covering strip. Fitting the plinth Important For the efficient operation of the appliance, it is important that the original ventilation grid is used. For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments. - Page 24 © Electrolux Household Appliances Limited 2000...