Samsung RF221NCTASP User Manual page 12

3.
Remove the 3 hex bolts that hold the hinge on
the top of the refrigerator with the 10mm socket
wrench.
Socket wrench
4. Remove the screw that holds the ground wire
with a philips screwdriver(+).
ground wire
5. Separate the hinge from the electric wire and
ground wire as shown above.
6.
Lift the door straight up to remove.
Be careful not to drop and scratch the doors
while removing them.
12_ setting up
7. Separate the cap on the middle hinge.
8.
Remove the screw attached to the left and right
middle hinges with a philips screwdriver(+).
Remove the 2 hex head bolts attached to
the left and right middle hinges with an allen
wrench(3/16").
Middle Hinge
Allen wrench
Disassembling the freezer door
1.
After opening the Freezer door, lift the drawer
box.
Remove 4 hex head bolt from both sides with
2.
a socket wrench(10 mm)