Wi-Fi Advanced Settings - Samsung SGH-I437 User Manual

4. If secured, you will also need to enter your WAP's
password.
5. Tap Save to store the new information and connect to
your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Turning Wi-Fi Off
1. From the Home screen, tap
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery and
reduce your use times.
Manually Scan for a Wi-Fi Network
1. From the Home screen, tap
2. Tap Scan.
All available Wi-Fi networks are displayed.
146
Settings.
.
OFF
Settings Wi-Fi.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless
Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to "Wi-Fi
Direct" on page 147.

Wi-Fi Advanced Settings

The Advanced Wi-Fi menu allows you to set up many of your
device's Wi-Fi service, including:
•
Network notification when an open network is available
•
Setting your Wi-Fi sleep policy
•
Checking for Wi-Fi Internet service
•
Automatically connecting to an AT&T Wi-Fi hotspot when detected
•
Specifying your Wi-Fi frequency band
•
Viewing your device's MAC and IP Address