Table of Contents
Advertisement
48
Getting Started
Adding memory (optional)
4
Highlight Shut down while holding the
click the Shut down option.
The computer closes all open applications, shuts down the
operating system, and then turns off.
5
Unplug and remove any cables connected to the computer,
including the AC adaptor.
6
Place a soft cloth on the work surface to prevent scratching the
top cover of the computer, and then place the computer upside
down on the cloth.
7
Remove the main battery. For information on removing the
main battery, see
on page
NOTE
8
Using a small Phillips screwdriver, loosen the screw(s) that
secures the memory module slot cover.
(Sample Illustration) Removing the memory module slot cover
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
"Removing the battery from the computer"
95.
To locate your memory module slot cover please refer to your Quick
Start document.
Shift
key, and then
Back of computer
Screws
Advertisement
Table of Contents
