Fixing Photos - Epson PictureMate Flash - PM 280 - PictureMate Flash Compact Photo Printer Product Information Manual

PictureMate Flash (PM 280)
6. At the next screen, select whether to apply the color effect to
the current photo or all photos, then press
You see your photo(s) with the color effect you selected.
7. Press to select the current photo for printing. Or you
OK
can print all photos or a range of photos (as described on
page 6).
8. Adjust any other settings you want, then press
print your photos.

Fixing Photos

PictureMate lets you correct the color and improve the image
quality of your photos without using a computer. Two types
of adjustments are available:
❏ Automatic adjustments
If your camera supports PRINT Image Matching (P.I.M.)
or Exif Print, the printer's
adjusts your photos for the best results.
The setting improves your photos' colors
PhotoEnhance
and increases contrast and sharpness. It may correct images
that are too dark, too light, or backlit.
❏ Manual adjustments
If your photos are too light or too dark, you can manually
adjust their brightness or control the saturation and
sharpness.
If you want, you can make manual adjustments while
PhotoEnhance is turned on in order to fine-tune your
automatic settings.
Note: These settings affect only your printed pictures. They do
not change your original image files.
Automatically Fixing Your Photos
PictureMate's automatic image adjustments are applied to all
your photos.
Note: The type of automatic adjustment you choose is kept until you
remove the memory card or cancel all settings. To use the same
setting whenever you print, see the Basics book.
1. After inserting a card, press
2. Press or to highlight
3. Press or to highlight
PictureMate Flash (PM 280)
10 -
.
OK
Print
setting automatically
P.I.M.
.
Menu
, then press .
Edit OK
, then press
Fix Photos OK
4. Press or
. You see the Auto Correction menu:
OK
to
5. Press or
❏
PhotoEnhance
colors and increases contrast and sharpness. It may
correct images that are too dark, too bright, or backlit.
(The default setting is
❏
: This information helps ensure an accurate image
P.I.M.
reproduction for files that include P.I.M. (PRINT
Image Matching
❏
: Prints photos as is or bypasses P.I.M. or Exif
None
Print data. Select this setting for the fastest printing.
6. Press to apply the selected setting.
OK
Note: The setting you select applies to all photos.
7. Press to select the current photo for printing. Or you
OK
can print all photos or a range of photos (as described on
page 6).
8. Adjust any other settings you want, then press
print your photos.
Manually Fixing Your Photos
You can manually fix individual photos or fix all your photos
at once. You can make different corrections for each photo on
your memory card.
1. Select a photo that you want to adjust.
2. Press
Menu
3. Press or
4. Press or
.
8/06
to highlight
Auto Correction
to highlight one of these options:
: This setting improves your photos'
PhotoEnhance
™
) or Exif Print data.
.
to highlight , then press
Edit
to highlight
Fix Photos
, then press
.)
to
Print
.
OK
, then press .
OK