Adjusting A Channel Level; Assigning The Component Video Inputs To Devices; Turning The Tone Control Effect On Or Off; Selecting The Osd Language - Insignia NS-R5101HD - AV Receiver User Manual

5.1 Surround Sound Receiver

Adjusting a channel level

After adjusting each channel with a test tone, you
can adjust channel levels based on individual
programs or to suit your preferences.
To adjust a channel level:
1 Press CH LEVEL. Each time you press this
button, the selected channel level changes in
the following sequence:
→ → →
L C
S W
• L—Front left speaker
• C—Center speaker
• R—Front right speaker
• SR—Surround right speaker
• SBR—Surround back right speaker
• SBL—Surround back left speaker
• SL—Surround left speaker
• SW—Subwoofer
Notes
If the channel level disappears, press CH LEVEL
again.
Depending on the speaker settings, such as setting a
speaker to NO or some surround modes, some
channels cannot be selected.
2 Press CH LEVEL + or CH LEVEL – to adjust the
level. You can adjust a level from -15 dB to
+15 dB.
3 Repeat Steps 1 and 2 to adjust additional
channels.
Assigning the component video inputs to
devices
This feature lets you assign the COMPONENT IN to
the DVD, GAME/AUX2, or CABLE/SAT.
To assign the component video inputs to
devices:
1 Press SETUP. The OSD opens.
SETUP MENU
SET ROOM EQ
SPEAKER SETUP
COMPONENT IN SETUP
TONE CONTROL
LANGUAGE
→ → →
R S R S B R S B L)
→ S L →
ON
ENGLISH
RETURN
www.insigniaproducts.com
2 Press TUNE or TUNE
COMPONENT IN SETUP, then press
ENTER/MEMO. The COMPONENT IN SETUP
screen opens.
COMPONENT IN SETUP
COMPONENT - 1
COMPONENT - 2
3 Press TUNE or TUNE
COMPONENT - 1 or COMPONENT - 2, then
press PRESET
device you want. You can select DVD,
GAME(/AUX2), CABLE(/SAT), or OFF (no
assignment).
4 Press RETURN to return to the main menu or
press SETUP to close the menu.

Turning the TONE CONTROL effect on or off

To turn the TONE CONTROL effect on or off:
1 Press SETUP. The OSD opens.
SETUP MENU
SET ROOM EQ
SPEAKER SETUP
COMPONENT IN SETUP
TONE CONTROL
LANGUAGE
2 Press TUNE or TUNE
CONTROL, then press PRESET
to select ON or OFF.
3 Press SETUP to close the menu.

Selecting the OSD language

To select the OSD language:
1 Press SETUP. The OSD opens.
SETUP MENU
SET ROOM EQ
SPEAKER SETUP
COMPONENT IN SETUP
TONE CONTROL
LANGUAGE
to select
DVD
[ CABLE ]
to select
or PRESET to select the
ON
ENGLISH
RETURN
to select TONE
or PRESET
ON
ENGLISH
RETURN
21