ELECTRONIC MONITORING CONTROL SYSTEM
Important! To activate the controller
after turning on the control power,
press the reset button.
To set the dry, cool, unload and out
of grain timers:
•
Press the dry, cool, unload or
out of grain button
•
Press the modify button
•
Press the increase or decrease
button to get desired setting
•
Press the enter button when
desired setting is reached
To set the load and unload delays:
•
Press the load or unload button
•
Press the modify button
•
Press increase or decrease
button to get desired setting
•
Press the enter button when
desired setting is reached
Pressing the increase and decrease
buttons simultaneously will access
the following programming features:
•
Safety circuit shutdown log
•
Dryer model number
•
Fan delay
Dryer owner and Airstream associates check the Electronic Monitoring Control System.
QUICK REFERENCE GUIDE
•
BPH factor
•
Fill auger options:
a. Center fill auger
b. End fill auger
•
Metering roll monitor disabling
feature
•
Air switch disabling feature
These features are accessed se-
quentially as listed above. Press the
increase or decrease buttons to
change a setting. Press the enter
button to move from feature to fea-
ture.
Pressing and holding the reset but-
ton for five seconds will access the
following programming features:
•
Calendar year setting
•
Calendar month setting
•
Calendar day setting
•
Clock hour setting
•
Clock minute setting
•
Bushel counter reset
•
Batch counter reset
These features are accessed sequen-
tially as listed above. Press the in-
crease or decrease buttons to
change a setting. Press the enter but-
ton to move from feature to feature.
To change the marquee on the
LCD display:
•
Press and hold the modify button
while turning on the control power
•
Press the increase or decrease
button to change a character
•
Press the unload button to move
the cursor to the right
•
Press the dry button to move the
cursor to the left
•
Press the cool button to delete
a character
•
Press enter when the desired
marquee is displayed
To reset the computer to the original
default setting, turn off the computer,
press and hold the green AUX 1 but-
ton and turn on the computer.
NOVRAM will appear on the LCD dis-
play. The year, date, time and min-
utes may be changed now, and the
shutdown history may also be cleared.
Note: If the history is cleared the
dryer model number must be reset or
only the bottom fan will operate (if so
equipped).
51