Advertisement
Quick Links
Quick Installation Guide
3.5" USB2.0 SATA Enclosure
Section 1
Hard Drive Installation
Step 1
Use the provided screwdriver to remove the two screws on the right side
of the enclosure. Pull out the right panel.
Model # AEN-U35SAB
Package Contents:
•
•
•
•
•
Ver. 1A
3.5" SATA Enclosure with
Stand
Power adapter
USB 2.0 Cable
Quick Installation Guide
Screwdriver and screw set
Advertisement
Related Manuals for Airlink101 AEN-U35SAB
Summary of Contents for Airlink101 AEN-U35SAB
-
Page 1: Hard Drive Installation
Ver. 1A Quick Installation Guide 3.5” USB2.0 SATA Enclosure Model # AEN-U35SAB Package Contents: 3.5” SATA Enclosure with • Stand Power adapter • USB 2.0 Cable • Quick Installation Guide • Screwdriver and screw set • Section 1 Hard Drive Installation Step 1 Use the provided screwdriver to remove the two screws on the right side of the enclosure. - Page 2 Step 2 Attach the SATA connectors to your hard drive. Step 3 With the hard drive label facing up, attach the guides to both sides of the hard drive. The picture below shows how the guide being attached to the hard drive correctly.
- Page 3 Step 4 Line up the guides with the case, and slide the hard drive back in. The enclosure should slide shut. Step 5 Secure the two screws that were removed in step 1. Step 6 Connect one end of the power cord to the back of the enclosure and connect the other end to a power outlet.
-
Page 4: Disk Management
The hard drive is now ready to use and you can find it under “My Computer”. Congratulations! The hard drive installation is complete. Note: If you do not see your hard drive under My Computer, please continue on Section 2. Section 2 Disk Management If your disk drive is brand new, you might not be able to see it under “My... - Page 5 Step 3 Right click on the Unallocated disk and select New Partition from the menu.
- Page 6 Step 4 Click Next to start the New Partition Wizard. Step 5 Select the desired Partition Type and click Next.
- Page 7 Step 6 Enter the desired Partition Size and click Next. Step 7 Select Assign the following drive letter and select a letter for the new disk drive or you can select other options preferred. Click Next.
- Page 8 Step 8 Select the File system and change the Volume label or you can select other options preferred. Click Next to start formatting the hard drive. Step 9 Click Finish after the New Partition Wizard completed.
-
Page 9: Technical Support
AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S.