Remote Control - Sharp LC-28HM2U Service Manual

LC-28HM2
AN-28SP2

Remote Control

5
7
9
1
POWER
INPUT
AV INPUT
1 2 3
COMPONENT PC
1 2
MUTE VOL
MENU ENTER
LCD MONITOR
Display
Remote Control
1 Infrared transmitter window
2 POWER button
• To switch off the power, press this button.
The POWER/Standby indicator lights up red.
• To switch the power back on, press this button
once more.
The POWER/Standby indicator lights up green.
3 INPUT button
Use this button to select an input source.
AV-1 AV-2
2
PC
• The input source mode is skipped if the corre-
3
sponding input terminal is not connected with
external equipment (except "PC").
4
• If you change the AV INPUT 3/AV OUT select,
you can select "AV-3".
6
4 AV INPUT buttons
Use these buttons to select an AV input terminal
directly.
8
• You can not select an input source to which
external equipment is not connected.
5 COMPONENT buttons
0
Use these buttons to select a COMPONENT termi-
nal directly.
• You can not select an input source to which
external equipment is not connected.
6 PC button
Use this button to select the PC mode.
q 7 MUTE button
Use this button to temporarily turn off the sound.
Press the button again to turn the sound back to the
previous level.
8 VOL (+)/(–) buttons
Use these buttons to increase/decrease sound volume.
The sound volume can be adjusted in the range 0~60.
0 MENU button
Use this button to turn on/off the MENU screen.
q ENTER button
Use this button to execute a command.
w Cursor buttons
Use these buttons to select a desired item on the
setting screen.
Remote sensor
window
6
COMPONENT1
COMPONENT2