Æ LCD panel handling precautions
1. Perform the job in clean environment. (Min. RH 50%)
2. Make sure workers wear the anti-static armband.
3. Perform the job on conductive mattress.
4. Handle carefully not to drop or give impacts or vibrations.
17. Remove the LCD unit front fixing screws (4 pcs.), and detach the LCD unit.
18. Remove the fixing angle fitting screws (3 pcs. at left and 2 pcs. at right) and the fixing angle L (bottom)
fitting screws (4 pcs.). Remove the ITO earth (top) and detach from the lamp base each of the
diffusion plate, ITO sheet, the diffusion sheet and the reflective polarization plate.
19. Remove the lamp reflectors at both right and left sides.
20. Remove the fluorescent lamps (12 pcs.).
21. Release the lamp clips, and detach one reflection sheet.
18
Fixing angle (left)
ITO sheet
18
17
LCD unit
18
ITO earth
19
Lamp reflector
18
17
18
Reflective
Diffusion
polarization
sheet
plate
Shield plate
Lamp base
Lamp
clips
(12 pcs.)
18
19
18
Fixing angle (right)
Diffusion
plate
18
18
Fixing angle L
18
11
LC-28HM2
AN-28SP2
Reflection sheet
21
20
Fluorescent lamp
Lamp reflector