Panasonic EP-MS40 Operating Instructions Manual page 17

Caution
Keep your head on the backrest
while shoulder position is being
determined.
If the shoulder position cannot be
correctly determined, an error
message (U10) is displayed and
operations are terminated.
To Customize
To adjust program intensity
Press the – + adjustment buttons.
To use the leg/foot massage simultaneously
Press the
(See page 23.)
3) A double beep and the flashing of
massage heads are being finely adjusted to the shoulder
position.
[Shoulder Position Adjustment Mode]
4) When the shoulder position is matched, press
begin the program.
• The program will begin automatically after 15 seconds if the
is not pressed.
button.
Press
position.
[Each press moves the massage heads
approximately 0.6 in. (1.5 cm).]
Notes
<Target shoulder position>
Too high
Correct position of the massage
head
(The point where the tapping
action should be felt)
Too low
Content of
display
Intensity 1
Adjustment
indicate that the
<How to adjust>
or to adjust the
to
button
2 3
16