Highlight Playback [Hc-V210]/[Hc-V201]/[Hc-V210M] - Panasonic HC-V210K Owner's Manual

Highlight Playback
Part that was recognized as clearly recorded is extracted from multiple scenes, and it can be played
back in a short time with effects and music added.
≥ Highlight Playback cannot be performed for scenes in iFrame or MP4.
1
Select using the cursor button,
then press the ENTER button.
2
(Only when you would like to change the
settings)
Select the desired item and press the ENTER button.
[SCENE SETUP]:
[PRIORITY SETUP]:
[PLAYBACK TIME]:
[EFFECT SETUP]:
[MUSIC SELECT]:
3
Select [START] and press the ENTER button.
≥ When the [SCENE SETUP] in step 2 is not changed, it will playback with the last recorded date.
4
Select the playback operation.
≥ When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or
[EXIT] is displayed. Select the desired item and press the ENTER button.
≥ Playing back of all the scenes returns if the unit is turned off or the mode is changed.
≥ Slow-motion Playback and Frame-by-frame Playback are not possible.
∫ Scene setting
1 (Only when Highlight Playback is started from [ALL AVCHD])
Select the type of recording method for the scene you wish to play back
using the cursor button and press the ENTER button.
[1080/60p]/[1080/60i]
2 Select [SELECT DATE] or [SELECT SCENES] and press the ENTER button.
[HC-V210]/[HC-V201]/[HC-V210M]
Select the scene or date to be played back.
Select the target to give priority to play back.
Select the time to play back.
Select the effect for playback.
Select the music to be played on playback.
(l 29)
- 61 -
(l 62)
(l 62)
(l 62)
(l 62)