Panasonic HC-V210K Owner's Manual page 108

Problem
The remaining time
indication or the elapsed
time indication is not
shown.
Problem
The unit arbitrarily stops
recording.
Auto Focus function does
not work.
"ENVIRONMENT TOO
DARK, OR LENS COVER
CLOSED." is displayed.
Color balance of images is
strange when recording in
a place such as a
gymnasium.
Color or brightness of the
image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
Indication
≥ [DISPLAY] of the [SETUP] is [OFF].
Recording
≥ Use an SD card that can be used for motion picture recording.
(l 16)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using the unit, format the SD card or built-in
memory. (l 38)
≥
/
If [AGS] is [ON], record in the normal horizontal position or set
[AGS] to [OFF]. (l
≥ Switch to Intelligent Auto Mode.
≥ If you are trying to record a scene that is hard to bring into
focus in Auto Focus Mode, use the Manual Focus Mode to
adjust the focus. (l
≥ Before turning on the unit, open the lens cover.
≥ This message may also be displayed when recording in a
very dark location.
≥ In a place with multiple light sources, such as a gymnasium or
a hall, set the White Balance setting to
If you cannot record clearly with the
it to (Manual adjustment mode).
≥ Color or brightness of the image may change, or you may see
horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ Record in Intelligent Auto Mode or set the shutter speed to
1/60 in areas where the power supply frequency is 60 Hz, or
1/100 in areas of 50 Hz.
- 108 -
Check points
(l 32)
Check points
/
50)
27, 56)
(l
(Indoor mode 2).
(Indoor mode 2), set
54)