Adobe 38043740 - ColdFusion Standard - Mac User Manual page 86

CHAPTER 7
82
Configuring Your System
Right-click the JRunScripts directory and select Properties.
a
b In the Properties dialog box, on the Virtual Directories tab, verify that the Local Path text box contains the
following path:
path/wsconfig/number (typically 1)
Configuring SunONE Web Server or iPlanet web server in Windows
You configure SunONE Web Server 6 or iPlanet web server 6.x for ColdFusion in Windows, and verify your
configuration, by using the Web Server Configuration Tool in GUI or command-line mode. This discussion
describes how to use GUI mode.
(Server configuration only) To use the command line, open the batch files located in cf_root/bin/connectors.
For more information, see the Web Server Management topic in Configuring and Administering ColdFusion.
Configure SunONE or iPlanet for ColdFusion in Windows:
Start the Web Server Configuration Tool by selecting Start > Programs > Adobe > ColdFusion 8 > Web Server
1
Configuration Tool.
Click Add.
2
In the Server pop-up menu, select the host name and the server or cluster name to configure. For the
3
ColdFusion server configuration, this is always coldfusion. Clustering support is not available on the server
configuration.
Note: The server or cluster does not have to reside on the web server computer.
In the Web Server Properties area, select SunONE Web Server (iPlanet) or Netscape Enterprise Server (NES),
4
and specify the path to the directory that contains the obj.conf file.
Select the Configure web server for ColdFusion applications option, and click OK.
5
Note: Omitting the previous step causes your web server to serve ColdFusion source code.
Copy the CFIDE and cfdocs directories from cf_root/wwwroot to your web server root directory. In addition,
6
copy your application's CFM pages from cf_root/wwwroot to your web server root directory. In the multiserver
configuration, these files are under the jrun_root/servers/cfusion/cfusion-ear/cfusion-war directory.
Verify your Sun ONE or iPlanet configuration
Verify that the following file was created: cf_root/runtime/lib/wsconfig/number/libjrun_nsapi.so
1
2 Open SunOne configuration file, obj.conf in the webserver directory (for example in C:\sunone\servers\https-
yourserver\config\obj.conf).