Table of Contents
Advertisement
"Use the Review feature" on page 114
"Using real-time scrubbing to review a show" on page 114
"Save an image of the current frame" on page 115
You can review an unlimited number of times while programming and recording a show. If
you need to change something, you can make the changes, record again if necessary, and
review again.
After recording and reviewing your show, you can make many changes without having to
rerecord your show: replace media, adjust media colors, change title text, and adjust digital
boost for live audio or volume levels for audio or video clips. Only moving or adding action
trays that contain camera sources requires rerecording the show.
Scroll to the point where you want to start the review, or click in the Teleprompter to jump
to the beginning of the show.
The review starts from your current position in the show—that is, the point in the show
corresponding to the position of the action bar.
Click Review, which is centered below the Preview Monitor.
As you scroll up and down in the Teleprompter and Action window, Visual Communicator
scrubs the visual media inputs and effects. Transitions run, video clips scrub, and, if the
Action window contains any cameras and the show is recorded, the recorded content also
scrubs. Otherwise, the live feed is shown.
Real-time scrubbing works regardless of how you move around in the show (using arrow keys;
the Advance, Previous, or Next Effect commands; the scroll bar; or the mouse wheel). The
main scrollbar to the right of the Action window lets you scrub an entire show at one time,
but the degree of control diminishes with the length of the show. For the finest control, click
and drag the splitter bar between the Teleprompter and Action window.
Advertisement
Table of Contents
