Contournodedynamicinfo Object - Adobe 38039927 - Fireworks CS3 - PC Extended User Manual

Property
succY
x
y
The following table lists the methods of the ContourNode object, along with their parameters.
Method
RegisterMove()
RegisterLinearMove()
RegisterCircularMove()
RegisterPolygonMove()

ContourNodeDynamicInfo object

The following table lists the properties of the ContourNodeDynamicInfo object, along with their data types and,
where appropriate, acceptable values and notes.
Property
duration
pressure
velocity
Data type Notes
The y coordinate of the contour node's following
float
control point.
The x coordinate of the contour node's main control
float
point.
The y coordinate of the contour node's main control
float
point.
Parameter Definition
object The RegisterMoveParms object containing the move
parameters. Use
MoveParms()
properties as needed. For a list of properties, see
"RegisterMoveParms object" on page 238.
point A point, which in combination with the node point,
defines the line to move along.
object The RegisterMoveParms object containing the move
parameters. Use
MoveParms()
properties as needed. For a list of properties, see
"RegisterMoveParms object" on page 238.
point The center point for the circular movement.
object The RegisterMoveParms object containing the move
parameters. Use
MoveParms()
properties as needed. For a list of properties, see
"RegisterMoveParms object" on page 238.
point The center point for the polygon.
object The RegisterMoveParms object containing the move
parameters. Use
MoveParms()
properties as needed. For a list of properties, see
"RegisterMoveParms object" on page 238.
Data type Notes
float 0.0 to 65,535.0 milliseconds
float 0.0 to 1.0
float 0.0 to 255.9999 pixels per millisecond
smartShape.GetDefault-
to obtain this object, then adjust
smartShape.GetDefault-
to obtain this object, then adjust
smartShape.GetDefault-
to obtain this object, then adjust
smartShape.GetDefault-
to obtain this object, then adjust
ADOBE FIREWORKS CS3 212
Extending Guide