Maintaining; Cleaning; Troubleshooting - eMachines eView_17F3 User Manual

www.emachines.com

Maintaining

Cleaning

When the monitor is turned off, a small
amount of electrical current still flows
through the monitor. To avoid electrical
shock, always unplug all power cables
and modem cables from the wall outlets
before cleaning the system.

Troubleshooting

To keep the monitor in optimal working order:
Do not block the ventilation holes.
■
Do not expose the monitor to rain or use near water.
■
Keep the monitor away from radiators or heat vents.
■
Keep the monitor out of direct sunlight.
■
Keep the monitor away from any equipment that generates a magnetic
■
field.
Use a screen saver to avoid permanent image burn-in. For more information
about screen savers, see the documentation that came with your computer.
Clean the monitor using a soft cloth lightly moistened with water. Wipe the
Warning
cabinet, glass panel, and controls.
Do not use any type of abrasive pad or glass cleaner. You will permanently
scratch the glass panel.
No picture
Make sure that the monitor is turned on.
■
Make sure that the power cord is connected correctly to both the back of
■
the monitor and the wall outlet.
Make sure that the video cable is connected securely to the back of your
■
computer.
If the power indicator is blinking:
■
■
■
Restart your computer with the monitor turned on.
■
Make sure that the video cable is not damaged.
■
Check the end of the video cable for any pins that might be bent or pushed
■
in.
Picture is scrambled
If the picture is scrambled or does not look right, use the Reset option in the
OSD to return the monitor to its factory default settings.
Make sure that your computer is turned on.
Move the mouse or press any key on the keyboard to bring the
monitor out of energy saving mode.
Maintaining
7