Samsung LN55C750 User Manual page 29

¦
Connecting to a Wireless Network
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, WIS10ABGN) , which you connect to your TV's back or side panel USB jack. See the illustration below.
To use the SWL(Samsung Wireless Link) function, connect to the
The LAN Port on
the Wall
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung's Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
NOTE
You must use the "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless
network.
Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered by select retailers,
Ecommerce sites and Samsungparts.com.
To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the
wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
If you apply a security system other than the systems listed below, it will not work with the TV.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
Keep the Samsung Wireless LAN Adapter at a distance from the TV. If you watch the TV with the Adapter connected
nearby, images may appear corrupted for some channels.
If your router, modem, or device is not certified, it may not connect to the TV via the "Samsung Wireless LAN
Adapter."
Connection Methods : You can setup the wireless network connection on six ways.
– Samsu ng Auto Configuration - For non-Samsung devices.
– PBC(WPS)
– Auto Setup (Using the Auto Network Search function)
– Manual Setup
– SWL(Samsung Wireless Link)
– Ad-Hoc
The Samsung Wireless LAN Adapter may not be recognized when using a connection via a USB hub or via a USB
extension cable other than the cable supplied.
BN68-02584A_Eng.indb 29
Wireless IP sharer
(AP having DHCP Server)
LAN Cable
- For Samsung devices only.
USB 1 (HDD) port.
Samsung Wireless
or
LAN Adapter
TV Side Panel
29
English
2010-08-31 9:16:54