Asus P5GC User Manual page 48

Important notes on Serial ATA
•
•
Serial ATA hard disk drive connection
4.. Optical.drive.audio.connector.(4-pin.CD)
This connector is for the 4-pin audio cable that connects to the audio
connector at the back of the optical drive.
P5GC.Internal.Audio.Connector
5.. Digital.Audio.connector.(4-1.pin.SPDIF_OUT)
This connector is for the S/PDIF audio module to allow digital sound output.
Connect one end of the S/PDIF audio cable to this connector and the other end
to the S/PDIF module.
P5GC.Digital.Audio.Connector
The S/PDIF out module is purchased separately.
2-26
You must install Windows
Service Pack 1 before using Serial ATA hard disk drives.
When using the connectors in Standard IDE mode, connect the primary
(boot) hard disk drive to the SATA1 or SATA2 connector. Refer to the table
below for the recommended SATA hard disk drive connections.
Connector
SATA1/SATA2
SATA3/SATA4
2000 Service Pack 4 or the Windows
®
Color Setting
Red Master
Black Slave
CD
(black)
SPDIF_OUT
®
Use
Boot disk
Data disk
Chapter 2: Hardware information
XP