Chipset - Asus P5B-PLUS User Manual

4.4.5

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced
Advanced Chipset Settings
WARMING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
North Bridge Chipset Configuration
Advanced
North Bridge Chipset Configuration
Memory Remap Feature
Configure DRAM Timing by SPD
Static Read Control
Initiate Graphic Adapter
PEG Port Configuration
PEG Force x1
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
Memory Remap Feature [Disabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-
bit operating system. Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
Configuration options: [Enabled] [Disabled]
Static Read Control [Auto]
Configuration options: [Disable] [Auto] [Fast] [Faster]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [PCI/PEG] [PEG/PCI]
PEG Force x1 [Disabled]
Configuration options: [Enabled] [Disabled]
ASUS P5B-Plus Series
BIOS SETUP UTILITY
BIOS SETUP UTILITY
[Disabled]
[Enabled]
[Auto]
[PEG/PCI]
[Disabled]
Configure Norrth Bridge
features.
ENABLED: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLED: Do not allow
remapping of memory
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4-23