Table of Contents
Advertisement
•
•
•
•
14. Optical S/PDIF Out port. This port connects an external audio output device
via an optical S/PDIF cable.
15. Coaxial S/PDIF Out port. This port connects an external audio output device
via a coaxial S/PDIF cable.
16. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
2-26
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cable and installed Serial ATA hard
disk drives; otherwise, you cannot enter the JMicron RAID utility and SATA
BIOS setup during POST.
If you intend to create a RAID configuration using this connector, set the
JMicron Controller item in the BIOS to [RAID Mode]. See section 4.4.6
Onboard Device Configuration for details.
DO NOT insert a different connector to this port.
DO NOT unplug the external Serial ATA box when a RAID 0 or JBOD is
configured.
Chapter 2: Hardware information
Hide quick links:
Advertisement
Table of Contents
