Table of Contents
Advertisement
Operating Instructions
What to do, if ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call an engineer to resolve a of fault
listed here, or to repair a fault caused by incorrect use or installation, a
charge will be made even if the appliance is in guarantee.
...Error messages
L
• If the
flashing, you can probably rectify the fault yourself.
After rectifying an
programme that has been started. The wash programme should con-
tinue. If the fault is displayed again, contact AEG Service Force.
• If indicators for other programme steps on the programme progress
display are flashing, please contact AEG Service Force and state the
fault indicated.
Symptom
L
on the programme
progress display is
flashing:
no water is running
into the dishwasher.
I
on the programme
progress display is
flashing.
L
and
programme progress
display are flashing
simultaneously.
26
I
or
indicator on the programme progress display is
L
or
Tap is closed.
The filter (where present) in
the threaded hose fitting is
blocked.
The water inlet hose is not
correctly laid.
The sink outlet is blocked.
The water drain hose is not
correctly laid.
The leak prevention system
I
on the
has been triggered.
I
fault, press the button for the wash
Possible Cause
Solution
Open tap.
Clean the filter in the
threaded hose fitting.
Check hose installation.
Clean the sink outlet.
Check hose installation.
Close the tap and contact
AEG Service Force.
Advertisement
Table of Contents
