Asus P4T-CM User Manual page 56

4. BIOS SETUP
UART2 Use Standard Infrared [Disabled]
When enabled, this field activates the onboard standard infrared feature
and sets the second serial UART to support the infrared module connector
on the motherboard. If your system already has a second serial port con-
nected to the onboard COM2 connector, it will no longer work if you en-
able the infrared feature. See IrDA-Compliant Infrared Module Con-
nector in 3.8 External Connectors. Configuration options: [Disabled] [En-
abled]
Onboard Parallel Port [378H/IRQ7]
This field sets the address of the onboard parallel port connector. If you
disable this feature, Parallel Port Mode and ECP DMA Select configura-
tions will not be available. Configuration options: [Disabled] [378H/IRQ7]
[278H/IRQ5]
Parallel Port Mode [ECP+EPP]
This field allows you to set the operation mode of the parallel port. [Nor-
mal] allows normal-speed operation but in one direction only; [EPP] al-
lows bidirectional parallel port operation; [ECP] allows the parallel port to
operate in bidirectional DMA mode; [ECP+EPP] allows normal speed op-
eration in a two-way mode. Configuration options: [Normal] [EPP] [ECP]
[ECP+EPP]
ECP DMA Select [3]
This field allows you to configure the parallel port DMA channel for the
selected ECP mode. This selection is available only if you select [ECP] or
[ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3]
Onboard Game Port [200H-207H]
This field sets the I/O address to the game port. Configuration options;
[200H-207H] [208H-20FH]
Onboard MIDI I/O [330H-331H]
This field sets the I/O address and IRQ for MIDI. Configuration options;
[330H-331H] [300H-301H]
Onboard MIDI IRQ [10]
This field indicates the onboard IRQ assignment for MIDI. Configuration
options; [3 ,4, 5, 7, 9, 10, 11, 12, 14, 15]
56 ASUS P4T-CM User's Manual