Table of Contents
Advertisement
When shooting under these conditions:
The flash does not fire. Use this setting
for outdoor pictures, or where flash is
prohibited or may be distracting, or when
shooting towards a reflective surface,
such as a window or a mirror. If there is not
enough light when using this setting, your
pictures will be too dark.
The flash fires automatically as needed.
Use this setting to take most pictures.
Use this setting to avoid red eye in your
subject's eyes. The camera fires a brief
preflash before the regular flash.
The flash fires for every picture. Use
this setting in high-contrast situations
to provide fill-light or use it indoors in
low light.
There is a slight delay in the flash than it
does in Auto. Hold the camera steady until
you have taken your pictures.
NOTE:
Never touch or block the flash with your fingers. Doing so can damage these
components and interfere with the correct flash operation.
Select this mode
on the LCD screen
Flash Off
Auto Flash
Red-eye
Reduction
Flash Always
Slow Sync
Icon shown
Advertisement
Table of Contents
