Page 2
Thank you for purchasing this AgfaPhoto digital camera. Please read these operating instructions carefully in order to use the digital camera correctly. Keep the instructions in a safe place after reading so that you can refer to them later. Precautions •...
Using your batteries For best performance and prolonged battery life, we recommend the use of AA lithium or rechargeable Ni-MH batteries. Extending battery life The following functions use up a great deal of battery power and should therefore only be used occasionally: •...
Contents RECAUTIONS GETTING STARTED SING COPE OF DELIVERY ARTS OF THE AMERA NSERTING THE ATTERIES ATTERY NDICATOR BOUT ATTERY NSERTING THE EMORY BOUT AMERA EMORY DCF P ROTOCOL ETTING THE ISPLAY ANGUAGE ETTING THE ISPLAY & T ETTING THE LCD M SING THE ONITOR MODE...
Page 5
ELETING A INGLE ELETING ULTIPLE ILES ELETING ILES ROTECTING A INGLE ROTECTING ILES ROTECTING ULTIPLE ILES DITING MAGES OTATING TILL MAGES HANGING THE MAGE HANGING THE MAGE WITH HOOSING THE MAGE WITH RAME OPYING THE ILES DPOF ETTING THE HOOSING A TARTUP MAGE MAKING CONNECTIONS...
Getting Started Using This Menu Getting Started This section contains information you should know before using this camera. Basic Operation This section explains all recording features of this camera. Basic Recording This section explains how to record still images, movies, and audio files. Other Recording Functions This section explains common operations about recording images.
Scope of delivery AgfaPhoto DC-833m Soft Case Software Installation CD-ROM Note that the shape of the charger plug depends on the area where you purchased the camera. Do not swing the camera around by the strap. USB Cable Strap Quick Start Guide...
Inserting the Batteries Open the battery cover. Slide the battery cover in the direction indicated by the arrow. Insert the batteries. Insert two AA-size batteries with the positive (+) and negative (-) poles matching the directions indicated inside the battery room. Close the battery cover.
Inserting the Memory Card You can use SD cards with this digital camera. The memory card slot is located beneath the battery cover, adjacent to the battery compartment. Open the battery cover. Slide the battery cover in the direction indicated by the arrow.
Setting the Display Language / Date & Time When using the camera for the first time after purchasing, be sure to choose a language and set the date & time before using the camera. Setting the Display Language Turn the power on, and set the camera to the Setup Menu ( Select [ Language].
Page 13
Apply the setting. After adjusting the settings, press the SET or the MENU button to apply the setting. If the batteries are removed for longer than 48 hours, the date and time will need to be re-set.
Using the LCD Monitor The LCD monitor is used to compose images while recording, adjust settings and replay images. The following indicators may appear on the LCD monitor while recording or playing back images. REC mode Recording mode ( Flash ( page 24) Macro ( page 25)
Page 15
PLAYBACK mode Playback mode ( Protect ( page 41) Voice memo ( File number / Total Battery ( page 5) Storage media Some information may not display correctly if you display images captured by other camera model. page 13) Recording info ( Histogram Captured date &...
Changing the LCD Status Press the SET/DISP button changes the LCD status as shown below: REC mode (A) OSD on (B) Full OSD Use the “Guide line” to compose images easily before shooting images. PLAYBACK mode (A) OSD on You cannot change the LCD status in the following situation: 。...
Basic Operation Turning the Power On and Off Press the POWER button ( ) to turn on the camera in the REC mode. The power turns on, the lens extends and the LED lights in green. Press the PLAYBACK button ( ) to turn on the camera in the PLAYBACK mode.
Changing the Mode You can record images and voices in the REC mode and use the PLAYBACK mode to replay, delete, or edit images on the LCD monitor. Switching between REC mode and PLAYBACK mode In REC mode, press the PLAYBACK button ( ) to switch to the PLAY mode.
Page 19
Display Title Landscape Used for the wide scenic views. Sunset Enhance the red hue for recording sunset images. Backlight Shooting the image of backlight object by changing metering. Smile Capture the most brilliant smile of characters. Capture Kids Take a still image to capture moving kids. Night Scene Shooting the subject while keeping the background night scenery.
Using the Menus When a menu is displayed, the four-way control and the SET button are used to make the desired settings. REC menu Turn the power on, and set the camera to the REC mode page 13). Open the REC menu. Press the MENU button ( ) to display the menu.
Sharpness Effect Off / B&W / Sepia / Negative / Red / Green / Blue Date Stamp Off / Date / Date & Time Stabilizer Off / On Face Tracking Off / On Photo Frame Off / Frame 1 ~ 10 Digital Zoom Off / On REC menu list (Movie)
Page 22
Setup menu Turn the power on, and set the camera to the REC or PLAYBACK mode page 13). Press the MENU button ( ) to open the REC or PLAYBACK menu. The menu displays depends on whether you are in the REC mode or the PLAYBACK mode.
Page 23
Setup menu list Menu Item [Shutter]: [Start-up]: [Beep]: Sounds [Volume]: [Off]: [1 sec.]: Auto Review [3 sec.]: [5 sec.]: [1 min.] / [3 min.] / [5 min.]: For power consumption, the camera is turned off automatically for Power Save a period of time. The power save feature will not activate in some situation Date &...
Page 24
Menu Item [Reset]: Resetting the file number is useful for avoiding the file name duplication when images are downloaded to a computer You can review images on a television with a supplied AV cable page 48). TV Out should be set to either NTSC or PAL TV Out depending on your region.
Basic Recording Recording Still Images Turn the power on, and set the camera to the REC mode page 13). Compose the subject on the monitor. Aim the focus area ( ) to the subject that you want to take. Half press the shutter button to focus the image. The focus area ( ) becomes green while in focus, then shutter speed ( ), aperture value ( ) and ISO value ( ) are displayed.
Using the Q mode The Q mode provides a simplified camera interface. Larger icons and fewer controls make it easier to take pictures anytime, especially for the beginners and elder users. You can use only the basic settings in the Q mode: Flash: Auto / Red eye / Force on / Slow sync / Force off Macro: Off / On...
Page 27
Setting Image Size and Quality You can select lower image resolution and quality to decrease the image size to capture more images. Choose a suitable setting according to the desired image quality and purpose. For details, see page 15. Resolution Values Image Size 3264 x 2448 3264 x 2176...
Using the Zoom Function Your camera has a combination of optical and digital zoom functions that allows you to zoom in on far away subjects or zoom out for a wide angle shot. The optical zoom is achieved by mechanically adjusting the lens of the camera. The digital zoom enlarges or shrinks the image using a software process.
Page 29
Using the Flash The flash is not only for taking pictures when there is insufficient light, but also when the subject is in shade or in backlight conditions. Press the flash button to cycle your camera through the various flash modes. The flash will not activate when continuous shooting or movie recording.
Page 30
Using the Macro Your camera is equipped with a macro function that allows you to focus on very close subjects. In macro mode you can focus on subjects 15 cm from the lens when in the maximum wide angle setting and 40 cm in the maximum telephoto setting. Turn the power on, and set the camera to the REC mode page 13).
Using the Self-timer & Burst Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot. Use the burst to record continuous still images shooting. Turn the power on, and set the camera to the REC mode ( Open the REC menu ( to select [Drive mode]...
Using the Aperture Priority In this mode, you can set an aperture value to match the brightness. A higher aperture value brings the background out of focus. Selecting a lower aperture value allows you to soft the background. Turn the power on, and set the camera to the Aperture Priority page 14).
Using the Manual Exposure You can manually set the shutter speed and aperture to achieve a particular effect. Turn the power on, and set the camera to the Manual Exposure page 14). Use the SET button to switch between aperture value and shutter speed control.
Recording Movie Clips Turn the power on, and set the camera to the Movie mode page 13). Compose the subject on the monitor. Aim the focus area ( ) to the subject that you want to take. The LCD monitor displays the available recording time ( ).
Recording Audio Clips Turn the power on, and set the camera to the Voice REC mode page 13). Press the shutter button to start recording. The voices are recorded from the microphone of the camera. Be careful to avoid touching the microphone while recording. Press the shutter button again to end recording.
Recording a Voice Memo You can add a voice memo to the still images after you record it. Turn the power on, and set the camera to the PLAYBACK mode ( Press to select a still image that you want to add a voice memo. If the image already has the voice memo recorded, the the LCD monitor.
Other Recording Functions Setting the Metering There are 3 different light metering options available on your camera. Option Light is measured from the entire shooting screen, but gives more importance to the values near the center. Selects an exposure based on readings from multiple points in the subject area.
Setting the ISO With the initial settings, the ISO sensitivity is automatically set according to the brightness of the subject. Option Auto Sets the ISO sensitivity automatically. ISO 50 Sets the sensitivity to ISO 50 equivalent. ISO 100 Sets the sensitivity to ISO 100 equivalent. ISO 200 Sets the sensitivity to ISO 200 equivalent.
Setting the Sharpness You can select whether you want the image to have sharp or soft outlines. Option The edges of the image are emphasized. The edges will become sharp, but noise may occur in the recording image. The edges of the image are sharp. This is suitable for printing. The edges of the image are softened.
Setting Stabilizer With more sensibility and faster shutter speed to bright up the pictures, effectively prevent blur image caused by hand shack or target movement, one can take good pictures with little effort. Setting Face tracking After initializing face tracking function, the lens will lock the main character in the picture and follow the movements.
Playback Playing Back Images Turn the power on, and set the camera to the PLAYBACK mode ( page 13). The latest recorded image appears on the LCD monitor. If there are no images stored, a message [No image] appears. Press the four-way control : displays the previous image.
Page 42
Magnifying & Trimming Still Images Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Select an image. Press the image that you want to magnify or trimming. Only still images can be magnified and trimmed. Magnify the image.
Page 43
Viewing in Thumbnail Turn the power on, and set the camera to the PLAYBACK mode page 13). Press the zoom button [W], a thumbnail screen is displayed. Use the four-way control to select the desired image, and press [T] or the SET button to show the selected image in full screen.
Deleting Files Deleting a Single File Turn the power on, and set the camera to the PLAYBACK mode page 13). Open the menu. Press the MENU button ( ), then use the four-way control ( ) to select Delete ( press the SET button ( ).
Deleting Multiple Files Turn the power on, and set the camera to the thumbnail screen ( Open the menu. Press the MENU button, then Press to select to select Delete ) and press the SET button. Press to select [Select], and then press the SET button. The frame of the selected image turns green.
Protecting a Single File Turn the power on, and set the camera to the PLAYBACK mode page 13). Open the menu. Press the MENU button, then use the four-way control to select Protect ) and press the SET button. Press to select [SINGLE], and then press the SET button.
Protecting Multiple Files Turn the power on, and set the camera to the thumbnail screen page 38). Open the menu. Press the MENU button, then Press select Protect ( the SET button. Press to select [Select], and then press the SET button. The frame of the selected image turns green.
Editing Images Rotating Still Images Turn the power on, and set the camera to the PLAYBACK mode page 13). Press to select the image you want to rotate. Open the menu. Press the MENU button, then use the four-way control to select Rotate ( and press the SET button.
Changing the Image with Effects You may use Red Eye Removal remove the red eye caused by flash from original photo. Or use color filters to save as a new image. Turn the power on, and set the camera to the PLAYBACK mode page 13).
Copying the Files You may copy the data from the camera’s internal memory to the memory card for convenience. Be sure you have inserted a memory card into your digital camera. Set the camera to the PLAYBACK mode. page 13). Open the menu.
Setting the DPOF The Digital Print Order Format (DPOF) setting allows you to select images on the memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer.
Choosing a Startup Image Turn the power on, and set the camera to the PLAYBACK mode page 13). Open the menu. Press the MENU button, then use the four-way control to select Start-up Image ( ) and press the SET button. Press to select the image you want, then press the SET button to apply the choice.
Making Connections Connecting the Camera to a TV You can display recorded images on a television with a supplied AV cable. Set the TV out to match the TV system that you are using ( Turn off the camera and the TV. Use the supplied AV cable to connect the camera to the TV set.
Connecting the Camera to a PC There are two ways to download files from the camera’s internal memory or memory card to a computer: Inserting the memory card into a card reader Connecting the camera to a computer using the supplied USB cable Using the Card Reader Eject the memory card from the camera and insert it in a card reader that is...
Appendix About the Folder & File Name Your digital camera automatically creates a directory of folders in the internal memory or memory card that it uses to organize still images, movie clips and other information. Folder Structure Folder name begins with a 3-digit number from 100 to 999 and followed by “DICAM”, each folder holds up to 9999 files.
Troubleshooting Problem Power does not turn on. The camera does not take pictures. Image is not recorded when the shutter button is pressed. The flash does not fire. Image is blurry or out of focus. Image is not displayed on the LCD monitor.
Specifications Sensor 8 mega pixels CCD, Size : 1/2.5 inch Lens Focal Length : f = 6.2 ( W ) ~ 18.6 ( T ) mm , 3X optical zoom, 4X digital zoom 2.5” LCD display Focus Range Normal: 80 cm ~ Infinity , Macro: (W) 15 cm ~ 1 m / (T) 40 cm~ 1 m Aperture F/ 2.8 ( W ), 5.2 ( T ) Shutter...
Customer care More information on the complete AgfaPhoto digital camera product range can be found under www.plawa.com / www.plawausa.com Service & Repair (USA/ Canada): 1-866 475 2605 www.plawausa.com Support Service (USA/ Canada): Support-apdc@plawausa.com Service & Repair Hotline (EU): 00800 752 921 00 (from a landline only) Service &...
Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Declaration of Conformity We herewith confirm the following designated product: AgfaPhoto digital camera DC-833m has been tested and found to comply with the requirements set up in the council directive on the approximation of the law of members’ states relating to the EMC Directive 2004/108/EC. For the...
Page 67
AgfaPhoto is used under license of Agfa-Gevaert NV & Co. KG or Agfa-Gevaert NV. Neither Agfa-Gevaert NV & Co KG nor Agfa- Gevaert NV manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer All other brands and product names are registered trademarks of their respective owners.