Delay Start Button - AEG L 71470 FL User Manual

B • The default spin speed of the programme.
• 'No Spin' 1)
C • The display symbols.
Symbols
D • The programme time
When the programme starts, the time decreases with steps of 1 minute.
• The delay start
When you press the delay start button, the display shows the delay start
time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer
to 'Troubleshooting' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
•
When the programme is completed.
1) Only available for Spin/Drain programme.
2) The symbols appear on the display when the related phase or function is set.
START/PAUSE BUTTON
Press button 4 to start or interrupt a
programme.
and 'Rinse Hold' symbols.
2)
Description
Washing phase
Rinse phases
Spin phase
Child lock
You cannot open the appliance door when the symbol is on.
You cannot open the appliance door when the symbol flash-
es. Wait for some minutes before you open the door.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
Delay start
4
4 flashes.

DELAY START BUTTON

Press button 5 to delay the start of a
programme from 30 minutes to 20
hours.
ENGLISH
9
5