Table of Contents
Advertisement
16
Use
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for
example
E20
End of programme
When the programme has finished a flashing zero is displayed, the Door pilot
light and the light of button
Select the Start/Pause
To start the selected programme, press button
stops flashing.
The washing pilot light wash is on to indicate that the appliance starts operating.
The door pilot light door is on to indicate the door is locked.
To interrupt a programme which is running, depress button
red pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the
7
button
again.
If an incorrect option is selected, the integrated yellow pilot light of the button
7
flashes for 3 times the message Err is displayed for about 2 seconds.
Programme progress display
After having pressed button
When the pilot light wash illuminates this means that the machine is performing
the washing cycle.
The door pilot light indicates if the door can be opened:
light on: the door cannot be opened. The appliance is running.
●
light off: the door can be opened. The washing programme is finished.
●
When the appliance is performing additional rinses the Extra Rinse pilot light
comes on.
(see paragraph «Something not working»).
7
7
, the wash pilot lights illuminates.
go out and the door can be opened.
7
; the corresponding red pilot light
7
: the corresponding
Hide quick links:
Advertisement
Table of Contents
