Asus P4C800-E Deluxe User Manual page 138

5.4.3 Creating a RAID 0 array (Performance)
1. In the FastBuild™ utility main menu, press "1" to select Auto Setup.
The following screen appears.
FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc.
[ ] Up
2. Use the arrow keys to go to the field
" Performance " with the space bar. The
3. After making a selection, press <Ctrl-Y> to save and create a RAID 0
array.
4. Press any key to reboot the system. During the boot process, the
MBFastTrak378 BIOS checks and displays the disk array information.
5. Once the array is created, use the FDISK utility to format the array as a
single hard drive.
6. After you have formatted the arrayed drives, install an operating
system (OS). The OS will treat the RAID 0 array as a single drive unit.
7. Install the RAID driver from the support CD that came with the
motherboard package.
Depending on the operating system you are installing, you may need
to install the RAID driver during or after the OS installation.
5-28
[ Auto Setup Options Menu ]
Optimize Array for:
[ Array Setup Configuration ]
Mode ........................................
Spare Drive.................................. 0
Drive(s) Used in Array....................... 2
Array Disk Capacity (size in MB)............. 8650
[ ] Down [ , ,Space] Change Option
[ ] Up [ ] Down [ , ,Space] Change Option
Performance
Stripe
[ Keys Available ]
[ESC] Exit [CTRL-Y] Save
[ESC] Exit [CTRL-Y] Save
Optimize Array for
field displays " Stripe ".
Mode
Chapter 5: Software support
and select