Power Management Setup - Gigabyte G1.Sniper2 User Manual

Manual
Table of Contents

Advertisement

2-7

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Soft-Off by PWR-BTTN
PME Event Wake Up
Power On by Ring
Resume by Alarm
x
Date (of Month) Alarm
x
Time (hh:mm:ss) Alarm
HPET Support
(Note)
HPET Mode
(Note)
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC Back Function
ErP Support
higf: Move
Enter: Select
F5: Previous Values
Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off
Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec.
Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
PME Event Wake Up
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a PCI or PCIe de-
vice. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
(Default: Enabled)
Power On by Ring
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a modem that
supports wake-up function. (Default: Enabled)
Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Date (of Month) Alarm: Turn on the system at a specific time on each day or on a specific day in a
month.
Time (hh: mm: ss) Alarm: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
HPET Support
(Note)
Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system.
(Default: Enabled)
(Note)
Supported on Windows 7/Vista operating system only.
BIOS Setup
Power Management Setup
[Instant-Off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Enabled]
[32-bit mode]
[Disabled]
[Disabled]
Enter
[Soft-Off]
[Disabled]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
- 54 -
Item Help
Menu Level 
ESC: Exit
F1: General Help
F7: Optimized Defaults

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G1.sniper 2

Table of Contents