Table of Contents
Advertisement
GA-3CESL3-RH Motherboard
23) BATTERY
If you want to erase CMOS...
1.Turn OFF the computer and unplug the power cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the computer.
5.Or, you can use CLR_CMOS jumper to erase CMOS data
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
2 4
Advertisement
Table of Contents
