Gigabyte G1.Sniper M3 User Manual page 86

Step 2:
Select the new hard drive to add into the array to be rebuilt and press <Enter>. The following screen appears,
indicating that an automatic rebuild will be performed after you enter the operating system (look for the Intel
Rapid Storage Technology icon
If you do not enable automatic rebuild on this stage, you have to manually rebuild the array in the operating
system (see the next page for more details).
Intel(R) Rapid Storage Technology - Option ROM - 11.0.0.1339
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volumes :
ID Name Level
0 Volume0 RAID1(Mirror)
Physical Devices :
ID Devices Model
0 ST3120026AS
1 WDC WD800JD-22LS
Volumes with "Rebuild" status will be rebuilt within the operating system.
[hi]-Select
Performing the Rebuild in the Operating System
•
While in the operating system, make sure the chipset driver has been installed from the motherboard driver disk.
Then launch the Intel Rapid Storage Technology utility from All Programs in the Start menu.
Step 1:
Go to the Manage menu and click Rebuild to
another disk in Manage Volume.
The Status item on the left of the screen displays
the rebuild progress.
Appendix
in the notification area, which will show that a RAID volume is being rebuilt).
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
Strip Size
N/A 111.7GB
Serial # Size
3JT354CP 111.7GB
WD-WMAM9W736333 111.7GB
[ESC]-Exit
Step 2:
Select a new drive to rebuild the RAID and click
Rebuild.
Step 3:
After the RAID 1 volume rebuilding, the Status will
display as Normal.
- 86 -
4. Recovery Volume Options
5. Acceleration Options
6. Exit
Status Bootable
Rebuild Yes
Type/Status(Vol ID)
Member Disk (0)
Member Disk (0)
[ENTER]-Select Menu