Biostar H77MU3 Manual page 17

Uefi bios setup
Hide thumbs Also See for H77MU3:
Table of Contents

Advertisement

H77MU3 UEFI BIOS Manual
USB3.0 Support
This item enables or disables USB3.0 (XHCI) Controller support.
Options:
Enabled (Default) / Disabled
XHCI Hand-Off
This is a workaround for OSes without XHCI hand-off support. The XHCI
ownership change should be claimed by XHCI driver.
Options:
Enabled (Default) / Disabled
EHCI Hand-Off
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership
change should be claimed by EHCI driver.
Options:
Disabled (Default) / Enabled
Port 60/64 Emulation
This items enables I/O port 60h/64h emulation support. This should be enabled for
the complete USB keyboard legacy support for non-USB aware OSes.
Options:
Enabled (Default) / Disabled
USB transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Options:
20 sec (Default) / 1 sec / 5 sec / 10 sec
Device reset time-out
The item sets USB mass storage device Start Unit command time-out.
Options:
20 sec (Default) / 10 sec / 30 sec / 40 sec
Device power-up delay
"Auto" uses default value: for a Root port it is 100ms, for a Hub port the delay is
taken from Hub descriptor.
Options:
Auto (Default) / Manual
Device power-up delay in seconds
Delay range is 1 ~ 40 seconds, in one second increments.
Options:
5 (Default)
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents