TP-Link TD-W8901N User Manual page 47

TD-W8901N
Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
2) PIN code
If the wireless adapter supports Wi-Fi Protected Setup and the PIN method, you can add it to
the network by PIN with the following two methods. Click PIN code, you will see the screen as
shown below.
Method One: Enter the PIN into my Router
Step 1: For the configuration of the wireless adapter, please choose "Enter a PIN into my
access point or a registrar" in the configuration utility of the WPS, and get the PIN
code on the screen as below, then click Next.
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-22
39