Huawei SmartAX MT883 Quick Start Manual page 2

To connect the cables, do as follows:
Step 1 Connect the telephone jack on the wall to the LINE interface on the splitter
with a telephone line. Connect the telephone to the PHONE interface on the
splitter with a telephone line.
Step 2 Connect the ADSL interface on the MT883 to the Modem interface on the
splitter with a telephone line.
Step 3 Connect the LAN interface on the MT883 to the Ethernet interface on the
computer with a network cable.
LINE
POWER
LAN
RESET
ADSL
PHONE
Modem
2