Configuring The Mt882A; Changing The Administrator Password Used For Logging In To The Web; Configuration Page - Huawei SmartAX MT882a User Manual

2. Click Create a new connection in Network Tasks to display the New
Connection Wizard window, and then click Next.
3. Select Connect to the Internet, and then click Next.
4. Select Set up my connection manually, and then click Next.
5. Select Connect using a broadband connection that requires a user
name and password, and then click Next.
6. Enter the name (as desired) of the dial-up connection in ISP Name, and
then click Next.
7. Select Anyone's use or My use only, and then click Next.
8. Enter the user name and password provided by the operator and used for
the dial-up connection, and then click Next.
9. Select Add a shortcut to this connection to my desktop, and then click
Finish.
An icon for the dial-up connection is displayed on the desktop of the computer.
You need to perform the preceding operations only once for creating a network
connection. After the network connection is created, to access the network,
double-click the icon for the dial-up connection, and then click Connect in the
displayed dialog box.

5 Configuring the MT882a

5.1 Changing the Administrator Password Used
for Logging In to the Web Configuration Page
For safety reasons or to make the password easy to remember, you can change the
log-in administrator password after logging in to the Web configuration page.
To change the password, do as follows:
Step 1
Choose Tools > System Management in the navigation tree to display the
system management page.
Step 2
Click
Step 3
Enter the old password and the new password, and then enter the new
password again in the Retype to confirm text box for confirmation.
Step 4
Click Submit.
After you change the password successfully, the current page jumps to the page for
logging in to the Web configuration page. To log in to the Web configuration page,
enter the new password, and then click OK.
to display a dialog box.
17