Acura 2008 RL Owner's Manual page 419

Hide thumbs Also See for 2008 RL:

Table of Contents

Use a Phillips-head screwdriver to

remove the two undercover bolts,

and remove the holding clip with a

flat-tipped screwdriver.

Carefully push up the side under

cover into the bumper.

Remove the electrical connector

from the bulb by pushing on the

tab and pulling the connector

Remove the bulb by turning it one-

quarter turn counterclockwise.

Insert the new bulb into the hole,

and turn it one-quarter turn

clockwise to lock it in place.

Push the electrical connector back

onto the bulb. Make sure it is on

all the way.

Turn on the fog lights to test the

Reinstall the two undercover bolts

on the side under cover and

tighten them securely. Put the

holding clip back on the side

under cover and push on the

center until it locks (the center is

flush with the head).

Chapters

Table of Contents