Acura 2009 MDX Navigation System Navigation Manual page 139

Hide thumbs Also See for 2009 MDX Navigation System:
Table of Contents

Advertisement

Frequently Asked Questions
Problem
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
The daytime map screen is dark like the night display mode,
and it is hard to see. Why?
Once I press the Display Mode button
longer automatically switches between day and night display
modes. Why is this?
How can I input my destination using map coordinates?
How do I change or remove my PIN?
I forgot the PIN. How do I reset it?
I changed my setup settings, but they are not saved when I
restart the vehicle.
I cannot access my Calendar or Address Book. Why?
CALL is not available on the Calculate route to screen.
Why?
138 Navigation System
Verify the following: The nighttime dash brightness control is not set to
maximum, and Map Color in Setup is set to Black for Night. See
Switching Display Mode Manually on page 105.
Verify the following: The Map Color in Setup is set to White for Day. See
Switching Display Mode Manually on page 105.
, the screen no
This is normal. Once you press the Display Mode button
manually controlling the display mode. Your manual display mode setting is
canceled the next time the vehicle is started.
The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the Interface Dial, selecting
Show Icon on Map, and moving the Interface Dial left to select
Current Location. See Map Screen Legend on page 55.
Go to "Personal Information" in the Setup screen (second), and select PIN
Number. Enter your existing PIN, and then you have the choice to change
or remove the PIN. See page 89.
PINs are optional. See information regarding PINs on page 18. Your dealer
can reset the PIN for you.
Verify that your Remote Keyless Entry is linked (the MID shows "Welcome
driver 1" or "Welcome driver 2"). See page 18 for additional information.
Your phone is not paired to HFL, or if your phone is paired, it is in use or
does not have good coverage; press the HFL BACK button.
Solution
, you are

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents