Traffic Rerouting; Edit Avoid Area - Acura 2009 TSX Navigation Manual

Traffic Rerouting

When driving en route to your
destination, if Traffic Rerouting is set
to ON and the system finds a faster
route based on traffic flow information
or detects a Road Closed incident, it
automatically recalculates and displays
a pop-up box to signify that the route
has changed.
You can also calculate the detour route
manually by choosing to avoid specific
incidents and/or congestion on your
route (see Traffic Rerouting on
page 72).
When Traffic Rerouting is set to
OFF, the system will neither calculate
the detour route nor display the pop-up
box. The factory default is OFF.
NOTE:
Automatic traffic rerouting may give
inappropriate guidance in metro areas
with limited or incomplete traffic flow
data.

Edit Avoid Area

This function allows you to select areas
you wish to avoid when calculating a
route to your destination. You can select
up to five areas to avoid. You may wish
to set up an "avoid area" to route around
long-term road construction, closures,
or any area you wish to avoid. If you
enter a route that takes you through or
into an "avoid area," a pop-up box will
warn you that your route takes you into
one of these areas. However, you can
still choose destinations in an avoided
area.
When you select Edit Avoid Area, the
following list screen is displayed.
System Setup
You can select NEW AREA by moving
the Interface Dial to the right, or select
one of your existing areas to modify. If
you choose NEW AREA, the following
screen is displayed:
Say or select Edit Name, and use the
Interface Dial to enter the name on the
Enter avoid area name screen (19
characters max). Say or select DONE to
return to the previous screen.
Navigation System 105