ActiveForever.com CL 100-C Owner's Manual page 14

7. Connect the inflation hose to the
blower exhaust fitting on the top
of the power pack.
Insert the key lock pin into the
inflation hose fitting on the top of
the power pack.
The key lock pin must be
inserted into the adapter of the inflation hose fitting
when inflating. Failure to insert the key lock pin may
result in injury.
8. Plug the power pack into the electric outlet. Press the Turbo Wave
On/Off button to start the inflation.
NOTE: The power pack will make a rattling noise while
the pump is running with no water. This is normal.
Do not run the power pack without water for more
than 15 minutes.
9. Use the inflation hose to inflate the bladder cover and the connection
collar.There are two inflation fittings on the inflatable bladder
cover. Pinch the transparent fill valves while filling the cover to
ensure good air flow through the valve.
NOTE: After inflating the cover and collar, unplug the
power pack while assembling and filling the
spa with water.
14
User's Guide
��� ����
���