Page 2
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolu- tion of any such disputes. Acnodes 's total liability for all claims will not exceed the price paid for the hardware product.
Page 3
RMC7182 chassis. Chapter 2: Server Installation This chapter describes the steps necessary to install the Acnodes RMC7182 into a rack and check out the server configuration prior to powering up the system. If your server was ordered without the processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation.
CHAPTER 1 INTRODUCTION Overview The Acnodes RMC7182 is a high-end single processor, 1U rack- mount server. The RMC7182 is comprised of two main subsystems: the RMC7182 chassis and the embedded board. Please refer to our web site for informa- tion on operating systems that have been certified for use with the RMC7182.
Server Chassis Features The following is a general outline of the main features of the RMC7182 chassis. System Power When configured as a Acnodes RMC7182, the embedded system chassis includes a single 560W power supply. SATA Subsystem For the RMC7182, the motherboard chassis was designed to support four SAS or SATA hard drives, which are hot-swappable units.
Unpacking the System You should inspect the box the Acnodes RMC7182 was shipped in and note if it was damaged in any way. If the server itself shows damage, you should file a damage claim with the carrier who delivered it.
2-4 Installing the System into a Rack This section provides information on installing the Acnodes RMC7182 into a rack. If the system has already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. Note: This rail will fit a rack between 26"...
Installing the Server into a Telco Rack To install the Acnodes RMC7182 into a Telco type rack, use two L-shaped brackets on either side of the chassis (four total). First, determine how far follow the server will extend out the front of the rack. Larger chassis should be positioned to balance the weight between front and back.
CHAPTER 4 SYSTEM SAFETY Electrical Safety Precautions Basic electrical safety precautions should be followed to protect yourself from harm and the Acnodes RMC7182 from damage: o Be aware of the locations of the power on/off switch on the chassis as well as the room's emergency power-off switch, disconnection switch or electrical outlet.
7. Replace the chassis cover (replace the server in the rack, if necessary) and power up the system. 6-5 Power Supply The Acnodes RMC7182 has a single 560 watt power supply, which is auto- switching capable. Power must be removed from the system when replacing the power supply.
Page 89
'Tem- perature Tolerances', the installed CPU can now send its 'Temperature Toler- ance' to the motherboard resulting in better CPU thermal management. Acnodes has leveraged this feature by assigning a temperature status to certain thermal conditions in the processor (Low, Medium and High). This makes it easier for the user to understand the CPU's temperature status, rather than by just simply seeing a temperature reading (i.e., 25oC).
Page 101
Windows installation. 4. After the installation has completed, the system will automatically reboot. 5. Insert the Acnodes Setup CD that came with your system into the CD- ROM drive during system boot and the main screen will display.
Need help?
Do you have a question about the RMC 7182 and is the answer not in the manual?
Questions and answers