Technical Specifications - Acer AN1600 F1 Specifications

Acer AN1600 F1 Network Storage System Specifications

Technical Specifications

Dimensions 438.4 mm (W) x 705 mm (D) x 88.1 mm (H) ( 17.3 x 27.8 x 3.5 inches)
(with bezel)
Form factor
2U rack mount (with cable arms included)
Weight
Maximum
(approximate) (All component slots and sockets
fully populated)
Minimum
(One HDD, power supply, and
processor installed)
BTU rating Maximum
System inlet Operating
temperature
Non-operating
Relative humidity Operating
(non-
condensing)
Non-operating
Emissions FCC rating
classification
(EMC)
Normative standards
Power supply Rated steady-state power
Maximum peak power
38 kg (84 lbs.)
27.5 kg (60.6 lbs.)
2456.64 BTU/hr.
0° - 35°C (50° - 95°F) at sea level with an altitude
derating of 1°C per 305 m (1.8°F per 1000 ft.)
above sea level to a maximum of 3050 m (10,000
ft.) with no direct sustained sunlight. Maximum rate
of change is 10°C/hr. (18°F/hr.). The upper limit
depends on the type and number of options
installed. System performance may be reduced if
operating with a fan fault or above 30°C (86°F).
-40° - 70°C (-40° - 158°F) maximum rate of change
is 20°C/hr. (36°F/hr.).
8 - 90 % relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-condensing
5 - 95 % relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-condensing
Class A
EN55022, EN 61000-3-2, EN 61000-3-3, CISPR
22 Class A
720 W (at 100 VAC)
720 W (at 200 VAC)
720 W (at 100 VAC)
720 W (at 200 VAC)
7