Replacing The Graphics Card Heatsink - Acer Aspire 8942G Series Service Manual

Replacing the Graphics Card Heatsink

IMPORTANT: Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal
Module.
The following thermal grease types are approved for use:
Silmore GP50
•
Honeywell PCM45F-SP
•
ShinEtsu 7762
•
The following thermal pads are approved for use:
Eapus XR-PE
•
1. Remove all traces of thermal grease from the CPU using a lint-free cloth or cotton swab and Isopropyl Alcohol,
Acetone, or other approved cleaning agent.
2. Apply a small amount of thermal grease to the centre of the CPU—there is no need to spread the grease
manually, the force used during the installation of the Thermal Module is sufficient.
3. Place the heatsink onto from the Graphics Card as shown.
4. Replace the two (2) screws (in numerical order from 1 to 2) to secure the Graphics Card Heatsink to the
Mainboard.
Step
Graphics Card
Heatsink
146
Size
M2.5*6.5
2
1
Quantity
2
Screw Type
Chapter 3