Table of Contents
Advertisement
Product Specifications
Standards Conformance
Fiber Specifications
Fiber Cable
Connector
Wavelengths
Data Rate
Transmit Power
Receive Power
Optical Power Budget
Range
Ports
Media Connection
LEDs
Dimensions
Weight
Media Converter
AC Adapter
Input Power
Available Adapters:
Power Consumption
Power-over-Ethernet
Environmental
Temperature
Humidity
Certification
Immunity
Emissions
Safety
IEEE 802.3-2005 Ethernet, Fast Ethernet,
Full-duplex flow control
ITU-T G.985 single-fiber single-mode (WDM)
SC and splice (internal)
1310 nm transmit, 1550 nm receive
100 Mbps full duplex
-14 to -8 dBm
-28 to -7 dBm
16 dB
Up to 15 km (9.32 miles)
1 RJ-45 10/100BASE-TX
10BASE-T: Cat 3, 4, or 5 UTP cable
100BASE-TX: Cat 5 UTP cable
PWR, OPT (Fiber), TEST (Loopback), PoE (Power
over Ethernet), LINK (LAN status/activity), 100 (LAN
speed), FULL (LAN duplex mode)
18 x 11 x 3.5 cm (7.09 x 4.33 x 1.38 in.)
250 g (8.82 oz.) maximum
120 g (4.23 oz.) maximum
DC 12V, 1.0A (via AC power adapter)
United Kingdom - MU12-2120100-B2(UK)
Europe - MU12-2120100-C5(EU)
USA - MU12-2120100-A1(US)
4 Watts maximum
Input voltage: 36-52 volts, 90 mA, 4 watts
Note: Power can be provided to the CPE through the
LAN port based on IEEE 802.3af PoE specifications.
When both PoE is provided and the adapter is plugged
in, PoE power is used.
Operating: 0~40 °C / 32~122 °F
Storage: -40~70 °C / -40~158 °F
5~95% (non-condensing)
IEC 61000-4-2/3/4/5/6/8/11
FCC Class B
EN55022 (CISPR 22) Class B
EN 61000-3-2/3
IEC 60950-1 & EN 60950-1
UL 60950-1 & CSA 60950-1
Product Specifications
23
Advertisement
Table of Contents
