Toro 53765 - Outdoor Ecxtra Sprinkler Timer User Manual page 42

Automatic sprinkler system control timer
Table of Contents

Advertisement

Master Valve
A valve installed between the water source and irrigation
valves to control water flow to the irrigation system. The
timer automatically turns on the Master Valve circuit at
the beginning of each watering cycle.
Normally Closed
An electrical switch or circuit that is closed when it is off
and open when it is on.
Normally Open
An electrical switch or circuit that is open when it is off
and closed when it is on
Odd/Even Schedule
The Odd/Even schedule enables you to select odd or
even numbered days of the month as watering days.
Outdoor Timer Model
A timer model with an enclosure designed to for either
indoor or outdoor installation.
Plug-in Module
A small module that plugs into the Toro ECXTRA timer
to provide connection and operation of two additional
zones.
Power Supply
The plug-in transformer used to convert 115 V a.c. to 24
V a.c. for timer operation.
Pump/Master Valve Control Circuit
At the beginning of each watering cycle, before the first
sprinkler valve is turned on, the Pump/Master Valve Cir-
cuit is energized to either start the system pump or open
the master valve.
40
Pump Delay Time
The amount of time the Pump/Master Valve control cir-
cuit is energized before watering begins. The delay time
is adjustable from 1 to 60 seconds.
Pump Start Relay
When the ECXTRA timer is used to start a pump, a 24 V
a.c. relay switch is used to connect high voltage to the
pump starter. The timer is not designed to connect
directly to the pump start circuit.
Rain Delay
This feature enables all watering operations to be
delayed from 1 to 7 days. For example, rain is forecast in
your area for the next two days. Instead of turning the
timer off (and possibly forgetting to turn it back on), a
rain delay of 3 days can be easily entered. At the end of
3 days, the timer will resume automatic operation as
scheduled.
Rain Sensor
A rain sensor is a remote device which can be connect-
ed directly to your ECXTRA to automatically interrupt
watering during rain. When the rain sensor absorbs rain
water it automatically signals the ECXTRA to suspend all
watering operations.
Rain Sensor Control Switch
The sensor control switch is provided to enable the sen-
sor operation to be turned On and Off as needed.
Rain Sensor Configuration Switch
Rain sensors can be Normally Open or Normally Closed
type. The Rain Sensor Configuration Switch enables you
to use either type of sensor with the ECXTRA timer by
placing the switch in the appropriate position.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecxtra

Table of Contents