Panasonic CF-51JB0DCBM User Manual page 18

Reinstalling Software
14 Select the [Exit] menu and then select [Save Current Values], then press
At the confirmation message, select [Yes] and press Enter.
15 Turn the computer off by using the power button.
If additional instructions are included with the computer, be sure to read them. It may be necessary to perform
additional operations during the following procedure.
16 Perform the First-time Operation (
17 Start the Setup Utility and change the settings as necessary.
To change the drive letter of hard disk or CD/DVD drive
NOTE
Drive letters can be changed only when two or more partitions have been created on the hard disk drive.
The name of the C: drive cannot be changed.
Change the drive letters before installing applications.
A Click [start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools], and double-click [Com-
puter Management].
B Click [Disk Management] from [Storage].
C Right-click the hard disk partition or the CD/DVD drive name, and click [Change Drive Letter and Paths...].
D Click [Change...].
E Click [Assign the following drive letter] and the new drive letter, and then click [OK].
At the confirmation message, click [Yes].
18
page 11).
.
Enter