Table of Contents
Advertisement
14 Press F10 .
At the confirmation message, select [Yes] and press
Enter .
15 Perform the setup procedure for Windows by following
the instructions on the screen. (
16 Run the Setup Utility and change the settings where nec-
essary.
page 13)
<Changing the drive letter>
You can change the drive letter for the CD drive or hard disk
drive by the following steps.
Drive letters can only be changed when two or more parti-
tions have been created on the hard disk drive. The name
of the C: drive cannot be changed.
We recommend that you make these changes before in-
stalling applications.
Windows 2000
1 Select [Start] - [Settings] - [Control Panel] - [Administra-
tive Tools] - [Computer Management].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Path].
4 Select [Edit].
5 Select [Assign a drive letter] and the new drive letter, and
then select [OK].
6 At the confirmation message, select [Yes].
Windows XP
1 Select [start] - [Control Panel] - [Performance and Main-
tenance] - [Administrative Tools] - [Computer Manage-
ment].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Paths].
4 Select [Change].
5 Select [Assign the following drive letter] and the new drive
letter, and then select [OK].
6 At the confirmation message, select [Yes].
29
Advertisement
Table of Contents
