Prepare For Setup; Connect The Parallel Cable - Lexmark Z51 Color Jetprinter Getting Started Manual

1

Prepare for setup

User's Guide
Setup
software
Getting
Started
1
Unpack your printer.
2
Remove all packing material from the printer.
3
IMPORTANT: Before you connect your printer
to your computer, make sure your printer and
computer are powered off and unplugged.
2
Print
cartridges
1
Use a parallel cable that supports bidirectional
communication (IEEE 1284-compatible), such as
Lexmark P/N 1329605.
Note:
Power
supply
2
Fasten the metal clips on the printer to the parallel
cable.
1

Connect the parallel cable

2a... to the printer
If you are using Windows 98, you can use a
USB (Universal Serial Bus) cable. For
help, refer to the instructions in your
printed User's Guide.