Table of Contents
Advertisement
Operating instructions
What to do, when...
Certain problems are due to the lack of simple maintenance or
oversights, which can be solved with the help of the instructions given
here, without calling out an engineer.
...a flashing fault code appears
The intervention of an alarm is indicated by:
- indicator light of the programme in progress is flashing
- a fault code visible in the digital display.
Open the door and carry out the following suggested corrective actions (see
following chart).
Fault code / Malfunction
- Indicator light of the
programme in progress
is flashing.
- in the digital display
appears:
The machine does not fill
with water
- Indicator light of the
programme in progress
is flashing.
- in the digital display
appears:
The dishwasher will not
drain
- Indicator light of the
programme in progress
is flashing.
- in the digital display
appears:
32
Possible cause
The water tap is blocked or
furred with limescale.
The water tap is turned off.
The filter (where present) in
the threaded hose fitting at
the water inlet valve is
blocked.
The water inlet hose has not
been correctly laid or it is
bent or squashed.
The sink spigot connection is
blocked.
The water drain hose has not
been correctly laid or it is
bent or squashed.
Protection against flooding is
active.
Solutions
Clean the water tap.
Turn the water tap on.
Clean the filter in the
threaded hose fitting.
Check the water inlet hose
connection.
Clean out the sink spigot
connection.
Check the water drain
hose connection.
Close the water tap and
contact the Service Force
Centre.
Advertisement
Table of Contents
