Using Xm Radio; Connecting Your Xm Radio Receiver; Listening To Xm Radio; Saving Channel Presets - Pioneer HTS-LX70 Operating Instructions Manual

08 Other connections

Using XM Radio

Connecting your XM Radio receiver

After purchasing an XM Mini-Tuner (sold separately), you
will also need to activate the XM Radio digital radio
service to receive broadcasts.
Receiver subwoofer
Side panel
1 Connect an XM Mini-Tuner to the XM IN jack on the
side of this receiver subwoofer.
You will also need to activate the XM Radio service.
XM
2 Press to switch to the XM RADIO input.
For best reception, you may need to move the XM Mini-
Tuner antenna near a window (the southernmost window
should produce the best results).
• If after pressing XM RADIO the display shows Check
XM Tuner, try disconnecting the receiver and tuner
connections and then plugging them back in. If the
display shows Check Antenna, try disconnecting the
tuner and antenna connections and then plugging
them back in.
Note
1 You can check the strength of reception in Using the XM Menu on page 41.
2 Select XM000 (RADIO ID) from the display to check the Radio ID of the XM Mini-Tuner.
40
En
IN
XM
SATELLiTE
RADiO
SATELLiTE RADiO
XM Mini-Tuner
1

Listening to XM Radio

After connecting, you will be able to use this receiver to
select channels and navigate categories using the
display.
Selecting channels and browsing by genre
From the XM Channel Guide, you can browse XM Radio
channels in the order that they appear, or you can narrow
your channel search by genre.
ENTER
Press / to display the XM Channel Guide
•
then / and ENTER to select the channel of the XM
radio broadcast you want to hear.
• To browse by genre, first press CATEGORY, use /
to select a genre then press ENTER.
• To cancel and exit any time, press RETURN.
Tip
• You can select channels directly by pressing
D.ACCESS then the three-digit channel number.
• You can press DISP to change XM Radio information
in the display.
• The currently selected channel is automatically
chosen (without pressing ENTER) after 5 seconds.

Saving channel presets

This receiver can memorize up to 30 channels, stored in
three banks, or classes (A, B and C) of 10 stations each.
1 Select the channel you want to memorize.
See Selecting channels and browsing by genre above.
T.EDIT
2 Press T.EDIT.
The display shows a blinking memory class.
CLASS
3 Press to select one of the three classes then
press / to select the channel preset you want.
You can also use the number buttons to select a preset.
• The default for all presets is XM001.
ENTER
4 Press ENTER.
After pressing ENTER, the preset class and number stop
blinking and the receiver stores the XM channel.
Tip
• You can also press MEM during reception display to
save the information of up to 5 songs. See Using the
XM Menu on page 41 to recall this information.
2