Impres Tm Smart Energy Systems - Motorola AARMN4031B - Headset - Semi-open User Manual

IMPRES Smart Energy System:
TM
The IMPRES TM Smart Energy System automatically
reconditions IMPRES
on actual usage.
IMPRES™
Smart Energy Systems
IMPRES™ Chargers
Through the use of advanced charging algorithms and automatic recondition-
ing features, the IMPRES TM Smart Energy System ensures maximum talk-
time and optimized battery cycle life. This smart energy system automatically
reconditions IMPRES TM batteries based on actual usage, keeping them in
peak condition. Talk-time and cycle life are optimized and the need for manual
maintenance programs is eliminated. Its advanced conditioning features allow
batteries to be safely left on the charger for extended periods of time without
incurring the damaging heat build-up which can decrease battery cycle life.
In addition, batteries left in the charger are kept fully charged so they are
always ready when needed. This rapid-rate, tri-chemistry charging system
will also charge compatible non-IMPRES
radio platforms.
WPLN4182A IMPRES TM Single-Unit Charger, 120 Volt - US
WPLN4187A IMPRES TM Multi-Unit Charger, 120 Volt - US
WPLN4188A IMPRES TM Multi-Unit Charger, 220 Volt - Euro
WPLN4189A IMPRES TM Multi-Unit Charger, 240 Volt - UK
IMPRES™ Multi-Unit Chargers with Display Modules
Charger Display Modules provide powerful, "real time" analyzing information
for IMPRES TM batteries, including current charge status, battery mAh, and
voltage. Readout displays battery kit number, serial number and chemistry
and the time remaining to complete the charge for NiCd and NiMH batteries.
120 Volt.
WPLN4192A IMPRES TM Multi-Unit Charger with Display Modules - US
NLN7967A Wall Mount for Multi-Unit Charger
IMPRES™ Individual Charger Display Module
This module is compatible with the standard IMPRES™ Multi-Unit Chargers
WPLN4187A, WPLN4188A and WPLN4189A. Up to 6 modules can be used
per charger, one for each charging pocket. Includes detailed installation
instructions.
RLN5382A Charger Display Module for IMPRES Multi-Unit
Charger Version 1.3 or Later.
Note: Display Modules compatible with Multi-Unit Charger version 1.2 or earlier require a
software flash update. Version number is located on label on the bottom of the IMPRES™
Multi-Unit charger. If no version is shown, it is earlier than version 1.2. Version 1.2 will
appear as V1.20, 1.3 will appear as V1.30, etc.
batteries based
TM
TM batteries and supports multiple
WPLN4182A
IMPRES TM
Single-Unit Charger
WPLN4192A
IMPRES TM
Multi-Unit Charger
with Display Modules
Batteries left in the
charger are kept
fully charged so
they are always
ready when needed.
WPLN4187A
IMPRES TM
Multi-Unit Charger
15